Industry Articles
-
Are Mini Tripod Mic Stands Actually Good for Podcasting and Home Recording?
If you’ve been digging through forums trying to find the perfect microphone stand for a small bedroom studio or a podcasting desk, you’ve probably noticed something frustrating. Mo...Read more -
Which Heavy Duty Tripod Mic Stand Manufacturer in China Offers Best OEM?
Stop Settling for Flimsy Gear: A Real Look at Heavy Duty Mic Stands Let’s be honest. If you are running a podcast or a recording studio, the last thing you want to worry about is a...Read more -
Which Dual TS to 3.5mm Patch Cable Survives a Working Desk?
Somewhere in a rehearsal room there’s a lead that only works when the plug sits halfway out of the socket. Nine times out of ten the small end is the problem. The lead is usually a dual 6.35 mm TS to 3.5 mm TRS patch cable that someone bought by the dozen without opening the bag first. The ...Read more -
Why Does Your Boom Arm Keep Sagging? Sourcing the Right Mic Stand from China
If you have ever spent ten minutes carefully positioning a microphone, only to watch the boom arm slowly droop the second you let go, you already know the frustration. As a product...Read more -
What to Ask Before an OEM CAT6 EtherCon RJ45 Cable Order?
An RJ45 plug isn’t a stage connector. The latch snaps off in a road case, the boot works back after a hundred strikes, and the pair order inside the cable matters more than anyone says out loud. The one we keep on the shelf is a CAT6 EtherCon RJ45 cable, and it’s stocked in six length...Read more -
Why Do Heavy Duty Mic Stands Droop — and What Should You Check First?
We get the same email about twice a week. Someone bought a stand that looked solid online, mounted a heavy condenser on the boom, and three weeks later the arm is sagging. They tig...Read more -
What Should You Ask Before Buying a Double Subwoofer Speaker for Line?
A church in Guadalajara sent us a drawing in June. Not of a speaker. Of a room. Thirty metres long, a wooden floor, a balcony at the back, and a line array they’d already bought hanging over the front. What they wanted to know was how many double 18 cabinets they needed underneath it, and w...Read more -
Why Do Heavy Mics Sag on “Heavy Duty” Mic Stands? The Clutch Issue to Check
If you've ever watched a $500 studio condenser slowly tilt forward in the middle of a recording session, you know the frustration. You bought a stand labeled as a heavy duty metal ...Read more -
What Should You Ask a Crank Up Speaker Subwoofer Pole Supplier?
A rental crew in Birmingham rang us in March about a pole. Not a cabinet, not a driver. A pole. They run six full-range boxes with 35 mm sockets moulded into the bottom. On wedding jobs those boxes were sitting so low that the horn was firing into the backs of chairs. What they wanted was one the...Read more



